act ffxiv plugin act ffxiv plugins act ffxiv download how to install act ffxiv act ffxiv overlay ffxiv act setup act ffxiv setup
ACT (Advanced Combat Tracker) is an assist software with tons of features, more than 50% of high difficulty players will install ACT to use its damage stats for recording process / boosting output / correcting mistakes.
ACT or Advanced Combat Tracker is a third-party program recording the stats of your group during a raid or any content you play. This data can then be used to analyze a fight and see what mistakes have been made or how could you improve your skills rotation to output more damage for example.
什麼是潛銷・潛銷期是什麼意思？
當建案在初期階段，因各項建築、安全等資料尚未備齊、連接待中心也還沒蓋好、而建照還未取得時，是不能公開銷售的。
這時候，建商就只能先行在網路上放出資料或是開始推廣告該建案基本參考資訊，並掛上「預推案」、「即將公開」，通常這個階段就稱為「潛銷期」。
act ffxiv plugin・act ffxiv download
FFXIV Parsing Plugin NEW (2.6.6.1)Downloads
Parsing plugin for Final Fantasy XIV. -ravahn- -More Information- -Setup Guide- -FAQ- 1727 KB
FFXIV_ACT_Plugin
The ACT Parsing Plugin for Final Fantasy XIV This project is to track releases and issues for the ACT FFXIV Plugin. The source code is not currently public.
The DLL file included in this project enables the multi-game parser Advanced Combat Tracker (ACT) to process and display combat information from Final Fantasy XIV patch 6.0.
DISCLAIMER: Use of this program is at your own risk. Square Enix does not permit the use of any third party tools, even those which do not modify the game. They have stated in interviews that they did not view parsers as a significant problem unless players use them to harass other players, so the consensus is to not discuss parsers or DPS in-game at all.
I have started a Discord server for discussions regarding this plugin. All are welcome to join, but keep in mind this is for the purpose of developing and improving the plugin, and so may be moderated if discussions go wild. https://discord.gg/9tHJ7s2P3r
Installation Instructions:
1.Download & install ACT. If you have an existing ACT installation, please remove any other plugins, to ensure there are not any conflicts to start with. ACT can be downloaded here: http://advancedcombattracker.com/download.php
2.Launch the ACT Startup Wizard. On the Parsing Plugin tab, click the 'Get Available parsing plugins' button. Choose #73 "FFXIV Parsing Plugin", and click the "Use this plugin" button. Continue the wizard or close it as desired.
3.The FFXIV_ACT_Plugin reads a combination of memory and network data from your local pc. It has two different ways of accessing the network data:
a) Default mode - by default, it will use a windows raw socket for the game's network data. This requires running ACT as a local administrator and adding a firewall rule to permit it to do so. For Windows Defender it will prompt you to add this rule, but for other firewalls you will need to configure it youtself.
b) Use Npcap kernel driver - If you prefer, you can install Npcap separately from ACT and the FFXIV plugin. This will allow the plugin to read network data and bypass unique firewall or vpn configurations, and does not require running ACT as an Administrator. After installing Npcap, the feature can be enabled by going to the ACT Plugins tab, then to the FFXIV ACT Plugin tab, and enabling the "Use Winpcap-compatible library" feature.
什麼是潛銷・潛銷期是什麼意思？
FFXIV ACT Setup Guide
This guide is intended to get a FFXIV player setup with ACT and an overlay for parsing purposes and be able to upload logs to the FFLogs website.
ast updated: 2/11/2020 act_logo Contents
Installing ACT
Configuring ACT Running as Admin Adding
Firewall Exception FFXIV ACT Plugin
OverlayPlugin
Adding an Overlay Preset Overlays Custom Overlays
FFLogs Uploader Installing the Uploader Uploading a Log
什麼是潛銷・Installing ACT
Installing ACT
Navigate to the ACT website, click on the Download page tab, then click on the Advanced Combat Tracker - Setup link to download the ACT installation program.
Find the ACTv3-Setup executable in your downloads and run it to begin the installation (If you get a User Account Control prompt, click yes).
The setup program will ask you for the installation location and start menu folder (You can leave the default options). Click Install then Close to complete the installation.
Configuring ACT
Running as Admin
It is recommended that ACT be run as Admin. You can right click on the ACT shortcut and select the Run as administrator option. You may get an UAC prompt, select yes.
You can also configure ACT to always run as admin by right clicking on the shortcut then selecting Properties. In the Properties window, select the Compatibility tab, then check the Run this program as an administrator option. Click Apply to save the changes. This will ensure ACT is always run as admin.
Adding Firewall Exception
Open the windows Control Panel (you can search for control panel in the taskbar search bar). Select the System and Security category and under Windows Defender Firewall click on Allow an app through Windows Firewall.
Inside the allowed apps window, click on Change settings button, then on the Allow another app... button. This will open up a dialog window to select an app.
Click on the Browse... button and navigate to the ACT install folder. The default location should be in C:\Program Files (x86)\Advanced Combat Tracker.
In the ACT folder, select the Advanced Combat Tracker application and click on Open.
Back in the dialog window, click on Add to add ACT to the windows firewall exceptions.
Advanced Combat Tracker should now appear in the list of Allowed apps and features. Click OK and exit the Control Panel.
FFXIV ACT Plugin
Upon first running ACT, it will prompt you with the Startup Wizard. If you forget to download a parsing plugin, ACT will prompt you again the next time you run it, or you can manually open the wizard by going to Options > Miscellaneous > Show Startup Wizard.
In the Parsing Plugin section of the startup wizard, ensure FFXIV Parsing Plugin is selected from the dropdown, then click the Download/Enable Plugin button. You will receive an alert when the plugin has been added to ACT. Click Ok to dismiss it.
Click Next to move to the log file section. ACT will ask if it will be used for Final Fantasy XIV. Select Yes to configure ACT logs for FFXIV.
Click Next to move to Startup Settings, then Close to accept the default settings and finish the startup wizard.
At this point FFXIV_ACT_Plugin.dll should be enabled in Plugins > Plugin Listing.
OverlayPlugin
From the Plugin Listing tab, click on the Get Plugins... button near the upper right corner. This will open a window that will populate with available plugins for ACT.
In the Get Plugins window, select the [FFXIV+others]Overlay Plugin option and click on Download and Enable. This will add the latest ngld OverlayPlugin to ACT (the OverlayPlugin auto-updater may also run during this step).
The OverlayPlugin should now be setup. Click on the X to close the Get Plugins window.
At this point it is recommended to restart ACT before continuing on.
Adding an Overlay
Preset Overlays
Ngld's OverlayPlugin comes with built-in presets for a majority of popular overlays. To setup an overlay go to Plugins > OverlayPlugin.dll and click on the New button.
This will open the Create new overlay dialog. Enter a name for the overlay and select a preset from the dropdown (the overlayplugin will show you a preview of each preset). Once you have selected your desired overlay, click on the OK button to add your overlay.
Your overlay should now appear in the overlays list. Select it from the list to view and edit its settings. You can move your overlay to the desired position, then check the Lock overlay box to lock it in place.
You can add additional overlays using the same steps. Certain plugins, e.g. cactbot plugin, will populate the preset dropdown with additional presets for their respective overlays.
Custom Overlays
For an overlay not available in the presets, select the Custom option from the dropdown and the desired Type. For most overlays, it will be the MiniParse type.
In the overlay settings, make sure to add the overlay URL source. It can be a web url or the path to a local html file.
FFLogs Uploader
Installing the Uploader
Navigate to the FFLogs Download page and download the FFLogs client application for your platform.
Find the FFLogsUploader install application in your downloads and run it. The application will ask you whether to install for all users or just yourself. Click on the Install button after selecting your choice then Finish once the installation is done.
Uploading a Log
Note: You will need to register for an FFLogs account in order to upload logs.
Run the FFlogs Uploader application. Enter the account information you used to sign up. Once you are authenticated, click on the Upload a Log button.
Click on Choose to select the log to upload.
In the File Explorer, navigate to the folder where the log is saved. The default location is at %APPDATA%\Advanced Combat Tracker\FFXIVLogs. You can copy and paste that path in the explorer bar to go directly to the default folder.
In the log folder, selected the desired log to upload, and click on Open. To ensure the latest log is on top, you can sort by Date modified.
Choose the desired access level for the log: Public, Private, or Unlisted. Public will be ranked and Private and Unlisted are un-ranked. Anyone will be able to view a Public log. Private logs can only be viewed by you. Unlisted logs can be viewed by anyone with the link to the log.
If you want to upload only a specific encounter, toggle the Select Specific Raids To Upload option, then click on the Go! button.
Select the specific encounter you want to upload from the list and click on the Go! button. You may select multiple encounters by holding Ctrl on your keyboard.
Note: this view is only available if you selected specific raids to upload.
Once the uploader is finished uploading the encounters to the FFLogs website, click on View Report to open up the page in your default browser and view the log results.
什麼是潛銷・FFXIV ACT FAQ
TOC
- Troubleshooting stuff
- My ACT isn't showing any numbers. What can I do?
- My overlay isn't updating / not showing
- My overlay only shows if I'm out of the game / alt-tabbed
- My overlay shows over the game but stops updating
- My overlay doesn't sort by DPS
- ngld OverlayPlugin failed because it couldn't download something
- OverlayPlugin complains that Newtonsoft.Json is outdated
- OverlayPlugin complains that SharpCompress is outdated
- Cactbot's config tab is empty
- General questions
- Glossary
- Overlays
Troubleshooting stuff
My ACT isn't showing any numbers. What can I do?
Go to Plugins > FFXIV Settings and click Test game connection.
-
It complains about the firewall. What should I do?
Make sure you have a firewall exception for ACT. Also make sure that the.exefile (visible under Details) and network type are correct.If you're sure the firewall exception is correct, disable the firewall. If that fixes your problem, your exception is not correct. If that doesn't fix your problem, come to the Discord and mention that your parser doesn't work even when your firewall is disabled.
-
It complains about memory signatures/addresses. What should I do?
This usually means your parser doesn't work with your game version. Check the plugin page for updates. If you already have the latest version, you'll probably see a notice at the top of this FAQ that an update is being worked on.If you got this error with the latest parser and the game hasn't been updated in the last several days, go to the Discord and ask for help.
-
It complains that it can't find the game process.
Make sure you're running the correct ACT.exe.Advanced Combat Tracker.exefor the game in DirectX 11 mode (the default) andACTx86.exefor the game in DirectX 9 mode. -
It complains that no recent network traffic has been received.
Check if your firewall is interfering with the parser or if your VPN is causing problems.If you use a VPN, try disabling the "High performance network parser". Disabling it means ACT will cause more CPU load but it might fix your problem.
My overlay isn't updating / not showing
First, check if your FFXIV plugin is the first entry in your plugins list (you can find that on ACT's Plugins tab). If it isn't move it to the top using the arrows and restart ACT. If that didn't fix your issue, continue reading.
Make sure that ACT is showing DPS info on the Main tab. If that doesn't work, you'll have to fix ACT / the parser first. See the above section for more information about that.
Next, check the overlay log if it contains any of the following messages. The overlay log is the area below your overlay settings.
-
System.NullReferenceException - Object reference not set to an instance of an object.
Remove your current OverlayPlugin (delete the files and the folder you should have created for the plugin), restart ACT, click theGet Pluginsbutton on the Plugins tab and select OverlayPlugin from that list. This will install the latest OverlayPlugin for you. -
Could not load type 'RainbowMage.OverlayPlugin.EventSourseBase' from assembly 'OverlayPlugin.Core, ...'
You tried to use an addon or plugin which requires the ngld OverlayPlugin but you have the hibiyasleep version.You either have to look for a different download / build of the addon/plugin you're trying to use or switch to the ngld OverlayPlugin.
-
System.TypeLoadException - Could not load type 'System.ValueTuple``3' from assembly 'System.ValueTuple, ...
Update your .NET framework to 4.7.1 or newer.
Finally, here are some typical issues which can lead to an overlay showing up but not updating:
- Remove your current overlay, click
Newand select the overlay from the preset list. That should fix any issues related to a wrong URL, ACTWS setting, etc. - If you're using ngld's OverlayPlugin, load it directly after the
FFXIV_ACT_Plugin.dllto make sure no other plugin conflicts with it. - If you're trying to use MopiMopi or SkillDisplay with the ngld version, make sure you check the ACTWS checkbox.
If you're using any other overlay, uncheck that box since it can break overlays which don't support ACTWS (like Cactbot). - If you're using Cactbot, make sure you select the correct type (
Cactbotfor hibiyasleep andMiniParsefor ngld). - Certain overlays like MopiMopi don't work with the hibiyasleep version.
My overlay only shows if I'm out of the game / alt-tabbed
Set your game to run in Borderless mode. Fullscreen means the game has exclusive control of your screen and other programs can't draw over it.
Discord, Steam, etc. get around this by hooking into the game. We're trying to avoid this which is why we use windows to draw over the game.
- But it worked before ?!
Yeah, that was Windows doing some black magic. Essentially, it forced the game into a mode similar to Borderless. For some reason, this has been disabled in a recent Windows update.
My overlay shows over the game but stops updating
This is usually an issue with AMD's graphics driver. Make sure you disable AMD Chill or come to the Discord and ask for help there.
My overlay doesn't sort by DPS
If you're using the ngld OverlayPlugin, you have to enable sorting. Go to Plugins > MiniParseEventSource and set Sort By to DPS.
ngld OverlayPlugin failed because it couldn't download something
Go to the OverlayPlugin tab. It'll tell you more about the file it tried to download. You'll be able to retry the download or manually download the required file there.
OverlayPlugin complains that Newtonsoft.Json is outdated
Go to your ACT folder (that's where your Advanced Combat Tracker.exe is) and delete Newtonsoft.Json.dll. That file isn't part of ACT and most likely ended up there as part of a plugin. Please install plugins in %AppData%\Advanced Combat Tracker\Plugins or sub folders to avoid issues like this.
If OverlayPlugin still complains about Newtonsoft.Json even after you deleted that file, make sure that it's loaded before ACTWebSocket and Discord Triggers and any other plugin that might contain an old version of Newtonsoft.Json. If you need help locating the currently loaded version of Newtonsoft.Json, go to ACT's Plugins tab and click View Loaded Assemblies on the right side. It'll list all currently loaded assemblies and should show you the path to the currently loaded Newtonsoft.Json.dll.
Join the Discord if you need further assistance.
OverlayPlugin complains that SharpCompress is outdated
Disable ACTWebSocket or load OverlayPlugin before ACTWebSocket. If that doesn't help, check if you have a SharpCompress.dll file in your ACT folder (the folder that contains Advanced Combat Tracker.exe) and delete it. Check the above section for further info since it's the same problem just a different file.
Cactbot's config tab is empty
Check if your overlay log (the text box below your overlay settings) contains an error complaining about an outdated version of Newtonsoft.Json. If it does, follow the instructions above. If it doesn't, make sure you updated all of Cactbot's files (and not just the DLL or ui folder). If that doesn't help either, join the Discord.
General questions
How do I install OverlayPlugin or Cactbot?
Go to ACT's Plugins tab and click the Get Plugins button. Select the plugin you want from that list. If ACT complains during the Cactbot installation that it doesn't contain a plugin interface, then you have to update your OverlayPlugin first. The easiest way to do that is to completely remove your current OverlayPlugin and then add it again through the Get Plugins button.
How do I check my plugin versions?
Go to the Plugins tab, click on the plugin you want to check and look on the right side for FileVersion:. Next to that label, it will tell you the plugin version.
Where are the log files saved?
Go to Plugins > FFXIV Settings and look for the Log file location.
What is the difference between the ngld OverlayPlugin and hibiyasleep OverlayPlugin?
- hibiyasleep's OverlayPlugin hasn't been updated in 2 years and thus uses an older version of Chromium to render the overlays. That probably doesn't matter to you as a user but it means that overlays which work with the hibiyasleep version can't use more recent features like modern ES JavaScript syntax, new CSS features, etc.
- ngld's OverlayPlugin uses a single download for both x64 and x86 downloads to make installation easier.
- ngld's OverlayPlugin integrates most of ACTWebSocket's features making the latter redundant.
- ngld's OverlayPlugin added cutscene detection which automatically hides overlays during them. This feature can be turned off in the plugin configuration if you don't want that.
- ngld's OverlayPlugin allows you to assign the same hotkey to several overlays and doesn't require a restart for hotkeys to become active.
- ngld's OverlayPlugin offers more data for overlays.
- For details check the release notes since they contain the changes for each release.
Where can I find any documentation on the log file?
Cactbot's log guide is the best we currently have. We don't have any real documentation on the parser itself but feel free to ask on Discord if you have any specific questions.
Glossary
-
ACT, Advanced Combat Tracker
This program offers the core functionality by calculating DPS, HPS, etc. based on a log file. -
ACTWS, ACTWebSocket
This plugin runs a web server which accepts WebSocket connections which allows other applications to use ACT's data. Not maintained anymore. Most of the functionality has been integrated into ngld's OverlayPlugin. -
Cactbot
A collection of various overlays. Raidboss can show you timelines for boss fights and dungeons, the eureka overlay can show you points of interest for eureka, oopsyraidsy can show you certain mistakes and why people die. -
FFXIV ACT plugin
This plugin contains the FFXIV parser for ACT (there are other plugins which allow ACT to parse the data for other games). It captures the network packets sent/received by the game and additional data from memory and writes that information to a log file. ACT then reads that file and parses it with help from the plugin. -
FFLogs
A website that allows you to upload the raw network logs and aggregates them. -
Hojoring, Special Spell Timers, Yukkuri, UltraScouter
Hojoring is a collection of the following three plugins:- SpecialSpellTimer
Oversee skill cooldowns, trigger notifications for enemy actions, timeline for raids, etc. - Yukkuri
Replaces ACT's Text to Speech engine. Can interface with most TTS engines currently available. - UltraScouter
Extended HUD. Can display enemy HP values, remaining cast time, distance and direction of hunt marks, threat visualization, etc
- SpecialSpellTimer
-
OverlayPlugin (hibiyasleep, ngld)
This plugin is used for most overlays. It effectively runs a Chromium browser in the background to render web pages on top of the game. Various information like the current DPS values are forwarded by the plugin to the web page to display.For details on the difference between the two version, see above.
-
Parser
See FFXIV ACT plugin above. -
Triggers
A trigger allows you to define a certain action (showing an overlay, playing a sound, starting/stopping an OBS recording, ...) that should happen whenever a certain thing happens in the game. Very powerful but requires a solid understanding of regular expressions and log lines. -
Triggernometry
More or less replaces ACT's Custom Triggers feature with a much more capable version. For example, variables and conditions are supported, as well as visual warnings and callouts (auras).The plugin is a toolbox for building your own things for whatever calls and situations you like, and as such it does not contain any triggers out of the box. You can, however, find people sharing their creations through the plugin's remote repos feature or on Triggernometry's Discord server where you will also be able to find assistance in building your own things.
Disclaimer: A few of the above plugin descriptions have been taken from the FFXIV Discord's #plugin-showcase.
Overlays
If you have the latest OverlayPlugin, take a look at the different presets it offers (click the New button on the OverlayPlugin.dll tab). That list is more complete and includes previews.
Triggernometry, SpecialSpellTimers and UltraScouter can also display additional information on top of the game.
TODO: Add updated screenshots for all of these. Would probably more useful than the text descriptions.
However, pure DPS data / DPS tables are usually displayed by one of these:
-
Kagerou, README link
A very popular overlay displaying DPS, damage taken and HPS. Has a lot of options to customize the displayed data and overall look and feel. Works with all overlay renderers. -
MopiMopi, README link
Also fairly popular. Displays DPS and HPS. Doesn't group the data into tabs and instead displays both tables next to each other. Requires ngld's OverlayPlugin or ACTWebSocket. -
a modified version of RainbowMage
RainbowMage created OverlayPlugin and the first overlay that worked with it. Since then multiple modified versions have been created. This repo contains a pretty broad selection and additional overlays.Works with both hibiyasleep and ngld OverlayPlugin.
-
Ember, README link
This overlay tries to follow FFXIV's overall UI design and offers a bunch of data.
Works with all overlay renderers. -
Horizoverlay, README link
A simple horizontal damage meter overlay. It currently shows player dps, damage %, hps, encounter duration and total dps. Works with OverlayPlugin 0.3.3.13 or newer (both hibiysleep and ngld). -
Ikegami, README link
A simple horizontal miniparse overlay. Works with all overlay renderers.
-
-
FFXIV ACT: Advanced Combat Tracker Setup Guide - WePC
FFXIV ACT: Advanced Combat Tracker Setup Guide - WePC
Advanced Combat Tracker or FFXIV ACT for short is an addon that is designed to record and calculate statistics from live in-game data. Most ...
【FF14】ACT FFlogs的安装使用说明
本文搭配『萌新打高难』P3 观看。 一、ACT ACT（Advanced Combat Tracker）是一款有大量功能的辅助软件，50%以上的高难玩家会安装ACT使用它的伤害统计 ...
ACT Parser | FFXIV on Mac
ACT Parser. ACT Setup Guide for XIV on Mac 4.0+. Step 1: Download and Install ChmodBPF (Required install for ACT ...
Combat Resources - FFXIV 6.11 - AkhMorning
Advanced Combat Tracker (ACT) is a multi-game real-time & offline parser that analyses combat activity & presents summary & detail for many MMORPGs. ACT ...
▼Download address https://ffcafe.org/act/
https://ffcafe.org/act/
▼How to set up such a DPS display floating window after ACT is installed?
▼ Refer to this detailed graphic steps: https://www.yuque.com/ffcafe/act/overlay
https://www.yuque.com/ffcafe/act/overlay
▼Because each person's computer is different, you may encounter problems such as installation error/no data in DPS statistics/no sound in TTS, please refer to "Self-service troubleshooting guide for common problems" https://www.yuque.com/ffcafe/act
https://www.yuque.com/ffcafe/act
2. FFlogs
https://cn.fflogs.com/
The battle data recorded by ACT will be saved as a log file (log) and uploaded to FFlogs for analysis, so that it is more convenient to query the skills used in the dungeon / buff debuff / RDPS / movement / cause of death / etc. Many screen recordings cannot be seen. The data that comes out will be very intuitive and detailed in the logs.
Also, because it records a large number of data uploaded by players, it also provides functions such as output ranking/number of players who have passed this job/output interval.
FFlogs is more complex and newcomers generally cannot understand it, and there is no specific method to suggest. It is recommended to use the xivanalysis mentioned in the video to analyze the problem.
If you are interested in the detailed usage of logs, please refer to "FFLogs Graphical Usage Guide" https://bbs.nga.cn/read.php?tid=24695862
At present, FFlogs has deployed a domestic server, the website is opened in seconds, no magic is required for registration, and the client is also fast to download!
Log upload steps:
▼Download and install the client: https://cn.fflogs.com/client/download
▼Open the client and click [Upload Log]
▼The log file is stored in the ACT installation directory such as:
X:\ACT National Service Integration\AppData\Advanced Combat Tracker\FFXIVLogs
▼It is recommended to select [Public/Not on the list] [Select a specific copy to upload]
Public - Participate in the ranking publicly. Others can directly see the record and ranking
by searching for your ID. Private - You can't see the record when you search for your ID, and you can only view it when you log in with your own account.
Not search for the ID. can be seen by anyone
Send records to others / use the police network, don't choose private! !
If you don't check [Specific dungeon upload] - all the battle records of you fight wild monsters / wooden stakes / Fate / 4-player / 8-player books are all uploaded directly (this is too weird?)
▼You can get a record after uploading
▼Click the red circle icon button of the record
▼ An anonymous copy will be generated, without revealing the uploader ID or player ID
RD AD PD:
There are several algorithms for output, each with their own advantages and disadvantages and considerations. The PD on the ACT panel is very inaccurate. It is recommended that newcomers refer to the RD calculated by fflogs. If you are interested, you can refer to this post: "Translation and personal understanding of the core content of the official Logs algorithm" https://bbs.nga.cn/read.php?tid=24197480
other:
If you don't want to search for your ID to find you, you can refer to this post to hide (it does not affect your ability to upload/use FFlogs): "Explanation on issues related to recent FFLOGS hiding and unhiding personal data" https://bbs.nga. cn/read.php?tid=19696538
If you want to merge logs after changing your name, you can refer to this post: "Baboons who want to merge logs after changing their name" https://bbs.nga.cn/read.php?tid=26844341
3. About Logs Ranking
logs will give very rigid ranking numbers based on your output:
Gold - this output exceeded everyone at the time and was the first,
Pink - exceeded 99% of people
Orange - exceeded 95%-98% of people
Purple - exceeded 75%-94% of people
Blue - exceeded 50%-74% people
green - over 25%-49% people
grey - over 0%-24% people
grey 9 means your output is 90% of grey 10, grey 1 is 10% (6.0 remove with this setting)
And the output will be affected by the time, luck, and even the speed of killing the explosives. Even if you are in the exact same cycle as the first-ranked boss, the ranking may be very different.
When I use the graduation outfit, the big one is purple and orange, and when I use the small mechanic who doesn't have the forbidden or explosive production outfit, it's gray-green. The higher the number of layers, the lower the ranking. It is very normal for newcomers to be gray just after they have just passed, because you are not as good as others in every way. As long as it is not gray 9, it is fine, because the gap between gray 9 and gray 10 is similar to the gap between gray 10 and green 25. If you are not dead or gray 9, it means that you need to improve a lot. (6.0 removed this setting)
If you are a person who is willing to sacrifice himself for the sake of passing, he is a person who often destroys the group for the sake of ranking high greed and output, obviously you are better, he is worse,
In general, rankings are not all, high ranking ≠ strong strength ≠ too fast. Experienced players can also see problematic rankings,
It is recommended that newcomers do not care whether the ranking of logs is getting better or worse after reading this book. First go to the police network to find the problem, and deal with the most important and most difficult problem. With the improvement of equipment such as explosives, the ranking will naturally improve. 作者：卤蛋每天都在羡慕 https://www.bilibili.com/read/cv11638506/ 出处：bilibili
{{ article.title }}
